For many years there was a particular efficient method to store information on your computer – employing a hard disk drive (HDD). On the other hand, this type of technology is by now demonstrating its age – hard drives are actually loud and sluggish; they’re power–hungry and are likely to generate lots of heat throughout serious procedures.

SSD drives, on the contrary, are quick, use up far less power and they are much cooler. They offer a whole new approach to file access and storage and are years ahead of HDDs with regard to file read/write speed, I/O effectiveness and also power efficiency. Find out how HDDs stand up against the more recent SSD drives.

1. Access Time

Image

With the introduction of SSD drives, data accessibility rates are now through the roof. As a result of unique electronic interfaces found in SSD drives, the normal data access time has shrunk into a record low of 0.1millisecond.

Image

HDD drives continue to utilize the same basic data access technology which was initially created in the 1950s. Although it was considerably upgraded ever since, it’s sluggish when compared to what SSDs are providing. HDD drives’ data access speed can vary between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is very important for the effectiveness of any file storage device. We’ve run thorough testing and have established that an SSD can deal with a minimum of 6000 IO’s per second.

Image

All through the exact same tests, the HDD drives turned out to be significantly slower, with simply 400 IO operations handled per second. Even though this might appear to be a significant number, for those who have a hectic web server that contains lots of popular web sites, a slow harddrive can result in slow–loading websites.

3. Reliability

Image

SSD drives are lacking any sort of rotating parts, which means that there is far less machinery inside them. And the fewer literally moving components you’ll find, the fewer the possibilities of failure are going to be.

The common rate of failure of any SSD drive is 0.5%.

Image

As we have previously documented, HDD drives rely on rotating hard disks. And anything that utilizes a number of moving elements for prolonged amounts of time is more prone to failing.

HDD drives’ common rate of failing can vary among 2% and 5%.

4. Energy Conservation

Image

SSDs don’t have moving parts and need minimal chilling power. In addition they demand not much electricity to operate – lab tests have revealed that they’ll be operated by a standard AA battery.

As a whole, SSDs use up between 2 and 5 watts.

Image

HDD drives are known for being loud; they’re more likely to getting too hot and if there are several disk drives inside a hosting server, you have to have one more air conditioning device just for them.

In general, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

SSD drives allow for better data file accessibility speeds, which, in return, allow the CPU to complete file queries much faster and afterwards to return to other jobs.

The regular I/O wait for SSD drives is only 1%.

Image

When you use an HDD, you will need to invest time looking forward to the results of your file ask. Because of this the CPU will continue to be idle for more time, waiting around for the HDD to react.

The regular I/O wait for HDD drives is around 7%.

6.Input/Output Request Times

Image

It is time for some real–world illustrations. We, at ServeU.net Espana, ran a complete platform backup on a hosting server only using SSDs for file storage uses. In that procedure, the typical service time for an I/O query stayed beneath 20 ms.

Image

Compared with SSD drives, HDDs offer significantly sluggish service times for input/output queries. During a hosting server backup, the average service time for any I/O call can vary between 400 and 500 ms.

7. Backup Rates

Image

You can actually check out the real–world advantages of using SSD drives each and every day. For instance, with a hosting server loaded with SSD drives, a full back up is going to take merely 6 hours.

Image

We employed HDDs exclusively for a couple of years and we have got excellent familiarity with just how an HDD performs. Generating a backup for a web server equipped with HDD drives is going to take around 20 to 24 hours.

Should you wish to immediately improve the overall efficiency of your respective sites and not having to alter any kind of code, an SSD–driven website hosting solution will be a good alternative. Have a look at the shared website hosting services packages and the Linux VPS services – these hosting services have fast SSD drives and can be found at cheap prices.


  • Service guarantees

  •  
  • All of our Virtual Private Servers come with no setup fees and operate in a dependable network offering 99.9% of uptime. Full root access guaranteed.
  • Compare our prices

  •  
  • Effortlessly review the quotas and tools offered by all of our Virtual Private Servers. See exactly which VPS package offers you everything that you need to control your multi–media web presence comfortably.
  • Compare our hosting plans
  • Contact Us

  •  
  • You can easily get in contact with us 24x7x365 by email or by making use of our extra–fast ticketing platform. We provide a 1–hour response time frame guarantee.